| Title |
Updated |
Grade |
Popularity |
Size |
|
|
 Lantek Expert Cut Cut module reference manual |
2010-03-09 |
 |
89 |
1469.34 KB |
| Number of positions (e.g. 11): Total number of positions of the linear turret.
Position distance (e.g. 130,000): Distance between each turret position. The system will calculate
every clamp position adding to the first position the v.. |
| |
|
| Lantek Punching module configuration |
2010-03-09 |
|
98 |
938.97 KB |
| Rotation possibilities
The positions that are allowed for placing the parts in the automatic nesting. It is important to set
this parameter to 180 degrees if wanted to use the previous parameter.
True shape nesting&nb.. |
| |
|
| LANTEK HLK BIBLIOTHEK |
2010-03-09 |
|
59 |
589.94 KB |
|
Dieser Parameter dient zur Identifikation spezieller Teile wie 'Leitbleche', 'Kragen' usw. Bei rechteckigen
Figuren ermöglicht er, zu bestimmen, an welche Stelle das jeweilige Teil platziert werden muß: 'vorne',
'hinten', .. |
| |
|
| MANUAL MODULO DE CALDERERIA DE LANTEK |
2010-03-09 |
|
522 |
536.9 KB |
| 3. Edición de los parámetros de una figura: Parámetros
generales
Posición
Es la posición de la figura en el dibujo o en la canalización.
Cantidad
Cantidad de figuras que hay que producir.
Espesor
Espesor de la Figura.
Mater.. |
| |
|
| Lantek Manual Corte |
2010-03-09 |
|
116 |
1094.06 KB |
| ¨ Inicio - Ejecutar - d:\setup.exe
(donde d: es la unidad del CD-ROM)
El número de serie requerido aparece en la llave de protección.
Los datos a introducir, tienen que escribirse en mayúsculas.
El instalador guía el proceso de instalac.. |
| |
|
| Manual Lantek - Expert Cut Module |
2010-03-09 |
|
194 |
1987.36 KB |
|
1.1.3 Save
This option enables to save the changes made in a part. Once a new part has been created or an
existing part modified, any changes made must be saved before exiting by using this option.
&.. |
| |
|
| LANTEK DUCT MODULE MANUAL |
2010-03-09 |
|
52 |
504.54 KB |
| 2. Duct figures parameters:
When opening any of the figures that belong to the duct library, a dialog will appear. This
dialog is equal for every figure, and the parameters inside, will allow you to define the figure’s
dimensions... |
| |
|
| Manual Lantek - Expert Punch Module |
2010-03-09 |
|
56 |
2227.5 KB |
| 1 CAD MODULE - PUNCHING
Introduction
The 2D design module is a powerful application which provides multiple different tools for design
any type of part in two dimensions. It offers a wide range of drawing possi.. |
| |
|
| Lantek Manual Punzonado |
2010-03-09 |
|
239 |
848.1 KB |
| El programa pregunta los punzones exteriores
horizontales y verticales a utilizar. Seleccionar los punzones.
El programa puede proponer la posición de los punzones
en la torreta. A la izquierda, hay una lista de todos los
.. |
| |
|
| Backup and restore database |
2009-01-24 |
|
45 |
174 KB |
| Backup database:
We will create a backup file “backup.bak” of the LESystem database in the following path: “d:\lantek”.
You should make a copy of the LESystem folder where all the Expert information is saved (mec files, sheets,...).. |
| |
|
| Lantek Products Compatibility |
2009-01-24 |
|
42 |
33.5 KB |
|
Expert I, II
Expert III
Wos
Flex3D Unfolding Flex3D Profiles
Flex3D 5X
Flex3D SW
Flex3D &nbs.. |
| |
|
| COPY MOVE SHARE DATABASE |
2009-01-24 |
|
51 |
69 KB |
| THIS DOCUMENT IS VALID ONLY FOR LANTEK V 12.XX
This document describes how to proceed with the application CopyShDB.exe. This application allows to the user to:
· Copy a database
.. |
| |
|
| How to create an RTC File |
2009-01-24 |
|
58 |
72.5 KB |
| · Connect the Wibu-Key on the parallel port.
· Open the Control Panel (START à SETTINGS à CONTROL PANEL)
· &nbs.. |
| |
|
| DNC Standard |
2009-01-24 |
|
134 |
270 KB |
| 1.1 After installing Lantek Please create a directory called DNC in the “C:\LANTEK” directory.
1.2 Create a new shortcut to “c:\lantek\expert\dncstd.exe”
1.3 Copy the dncstd.cfg file from the “EXPERT” dire.. |
| |
|
| Euro Conversor Help |
2009-01-24 |
|
59 |
133.5 KB |
| The Lantek Euro Converter application allows to change the system reference money from one currenty to another. It must be used on Lantek Project or Expert v11.10. The first thing you see after clicking on the direct access in the init menu is a.. |
| |
|
| Expert Translator-V11 |
2009-01-24 |
|
71 |
47 KB |
| NEW LANTEK EXPERT INSTALLATION
With a new Lantek Expert installation, Expert will create a new EMPTY database, so the first time the software is run, it will show a panel with the database name and directory where all the informatio.. |
| |
|
| General functioning of the WOS automation program FbNFin |
2009-01-24 |
|
38 |
60.5 KB |
| Within the WOS automation section, a program has been created which allows access from outside to various WOS operations.
The object of this document is to explain the functioning of this program, named "fbnfin.exe" and which is located in .. |
| |
|
| Funcionamiento general del programa de automatización de WOS: FbNFin |
2009-01-24 |
|
136 |
62 KB |
| Dentro del apartado de la automatización de WOS se ha creado un programa que permite acceder desde el exterior a diversas operaciones que se realizan en WOS.
El objetivo de este documento es explicar el funcionamiento de este program.. |
| |
|
| Lantek Flex3D SolidEdge |
2009-01-24 |
|
36 |
38.5 KB |
|
Description of new features and fixed errors in Flex3D SE 23.0:
Compatibility with Solid Edge version 12. |
| |
|
| Lantek Flex3D SolidWorks |
2009-01-24 |
|
56 |
38 KB |
| Description of new features in Flex3D SW 23.0:
Compatibility with SolidWorks 2003. |
| |
|
| GENERATE THE MACHINING DATA FILE |
2009-01-24 |
|
55 |
80.5 KB |
| 1.- GENERAL PARAMETERS
- textPartNumber: CNC number or name.
- realXFromPoint: Machining init X coordinate.
- &.. |
| |
|
| Lantek Install |
2009-01-24 |
|
130 |
1383.5 KB |
| 1. Installation Pre-Requisites
1.1 Hardware
1.1.1 Minimum requirements
a. Client
· &nbs.. |
| |
|
| Lantek Pallet Configuration-English |
2009-01-24 |
|
73 |
147.5 KB |
| Description of Lantek Pallet v. 12.00 configuration.
The program is run from the module Lantek WOS-Office, inside the menu Utilities-Stackers.
Configure Lantek Pallet.
.. |
| |
|
| Lantek Pallet Demo-English |
2009-01-24 |
|
65 |
188 KB |
| 1.- Create in Expert a new manufacturing order with the machine called Goiti Fagor 8050. Design some parts and in the drawing module, tell the system that the part is going to be sheared and sent to box 1000 (menu Technology-Assign boxes)... |
| |
|
| Lantek Pallet Demo-Spanish |
2009-01-24 |
|
62 |
189.5 KB |
| 1.- Crear en Expert una nueva orden de fabricación con la máquina Goiti Fagor 8050. Se diseñan las piezas en el modulo de dibujo, y hay que especificar que esa pieza va a ser cizallada y va a ir a l acaja 1000, en el menú Tecnología –.. |
| |
|
| Lantek Pallet-English |
2009-01-24 |
|
27 |
79.5 KB |
| Description of Lantek Pallet v. 12.00.
TYPES OF STACKERS
Robot.- Ready to be installed.
· Gantry.- Evacuation from reception table or from machine (trumalift).
.. |
| |
|
| Lantek Pallet-Spanish |
2009-01-24 |
|
181 |
86 KB |
| TIPOS DE PALETIZADORES
Robot.- totalmente funcional.
Gantry.- Evacuación desde mesa o desde maquina (trumalift).
Peines.- falta post.
Funcionalidad de los stackers:
Todos los .. |
| |
|
| Move database |
2009-01-24 |
|
45 |
103 KB |
| This is an example to change an existing database from the f drive to d drive. We will create a new database called “move” in Expert in f:\lantek\database.
First of all, before moving the databases is VERY important to STOP the SQLServer... |
| |
|
| Nesting Split |
2009-01-24 |
|
28 |
93.5 KB |
|
1. Nesting split
Nesting split is an application to manage the nested sheets. You can explode the nesting in different quantities, or apart of explode them, or generate a multiprogram with a group of nesting.
1.1. .. |
| |
|
| Network |
2009-01-24 |
|
64 |
189 KB |
| 1. Installation ( SERVER SIDE )
Open the “Common\Tools\Protec\Wibukey\Server” folder in the installation CD.
Execute the WkRt-Int.exe install file in your Server Computer.
Execute the program “Network Server”.. |
| |
|
|
|
