| Title |
Updated |
Grade |
Popularity |
Size |
|
|
 CADCEUS Usage 2DNC Command |
2010-11-03 |
 |
10 |
721.65 KB |
| (3) Path output control by the arc radius value of a model
(a) Output control in the PrfAll machining process
When the calculated tool radius is smaller than the minimum arc radius in the profile model, you can specify disabling of the path (P.. |
| |
|
| CADCEUS Utility System Administration |
2010-11-03 |
|
23 |
296.26 KB |
| How to start a static process
1. [Start]->[Program]->[Cadceus]->[Dbserv]
c:\CADCEUS\CSH\Dbserv.bat is executed and process Å is started.
2. [Start]->[Program]->[Cadceus]->[License server].. |
| |
|
| CADCEUS Usage DieFace design support package |
2010-11-03 |
|
12 |
700.15 KB |
| Evaluation figures below are outputted.
1. Sectional curves of flange side and sectional curves of expansion side (including fillet R)
2. Thickness direction curves at both end points of the sect.. |
| |
|
| CADCEUS Capabilities Drafting |
2010-11-03 |
|
13 |
204.57 KB |
| 1. Make sure that plotter power is on.
2. Run the CADCEUS's plotting command.
n Select DRW:AU:PLOT/PLOT
· OBJECT: CURRENT
· LOWER: YES
· SHEET: NO
· FILE: DISCRD
· (PLOTTER): 3
· MDF-PAR: N.. |
| |
|
| CADCEUS Capabilities Hybrid Modeling |
2010-11-03 |
|
13 |
284 KB |
| (6) Inactive shape
Those faces which are deleted by set operations, filleting operations, and other
operations are called ‘inactive face’. Inactive vertex, inactive edge, and inactive
face are collectively called ‘inactive shape’.The syst.. |
| |
|
| Introduction to CADCEUS |
2010-11-03 |
|
13 |
238.27 KB |
| 1. Do not orient the mouse obliquely; keep it in parallel with the vertical line on the
screen. Move the mouse while monitoring the movement of the mouse cursor on
the screen (see the figure shown below).
2. When moving the mouse lo.. |
| |
|
| CADCEUS Usage Machining Information Files |
2010-11-03 |
|
10 |
654.94 KB |
| 1.5 Directory and File Environments
This section explains the directory and file environments for the NTBL files.
The NTBL files are managed by their NTBL path and directory.
(1) NTBL path
The NTBL path identifies the directory in which NTBL.. |
| |
|
| CADCEUS Capabilities NC Machining |
2010-11-03 |
|
9 |
321.59 KB |
| 2.1 Fundamental thought of NC Process Design
Consider an example of machining the following shape:
Perform a scanning on the entire area, with tool diameters of 50 and 30 mm.
Perform machining along the wall area of a boss, with tool diameter.. |
| |
|
| CADCEUS NC Machining |
2010-11-03 |
|
8 |
347.16 KB |
| The CADCEUS CAM modules consist of the following three software modules:
C/CAM MANAGER
C/3DNC
C/2DNC
C/CAM MANAGER provides the user with extensive supports for running C/3DNC and C/2DNC to perform NC
data preparation interactively using a .. |
| |
|
| CADCEUS Capabilities Overview |
2010-11-03 |
|
11 |
81.32 KB |
| The manufacturing industries are strongly asked further improvement of
product quality, reduction of development cost, and shortening of
development time in order to meet wide variety of market needs. Drastic
innovations in .. |
| |
|
| CADCEUS Capabilities Parametric Modeling |
2010-11-03 |
|
24 |
290.78 KB |
| Prerequisite
You are expected to have knowledge equivalent to that provided in ‘CADECEUS
Capabilities - Overview’, ‘CADCEUS Capabilities: Hybrid Modeling’, and
‘CADECEUS Usage: Sketch Functions’.
Main contents
Chapte.. |
| |
|
| CADCEUS Usage Parametric Command |
2010-11-03 |
|
17 |
1208.17 KB |
| Two or more UoCs are defined as a group. Furthermore, you can delete or break
groups, or add or remove members (UoCs) to (from) a group.
A group defined by this function can be used as an input unit when entering two or
more UoCs to exe.. |
| |
|
| CADCEUS Usage Solid Command |
2010-11-03 |
|
10 |
446.06 KB |
| 1. There are the following two ways of projecting a curve.
‘Normal curve’: This is used to project a curve in the direction perpendicular to a
plane. An infinite or semi-infinite curve cannot be projected in
the direction perpen.. |
| |
|
| CADCEUS Usage Surface Command |
2010-11-03 |
|
6 |
166.39 KB |
| [Details]
1. Center curve
Specify a smoothly connected chain of curves.
By specifying ‘Rounding’, a specified radius can be automatically added to curved
sections of the center curve.
2. Ways of s.. |
| |
|
| CADCEUS Usage 3DNC Command |
2010-11-02 |
|
13 |
1492.23 KB |
| (1) Starting 3DNC
The 3DNC functions are activated using the CAM MANAGER function. You can start the 3DNC
functions from the toolpath calculation specification of the NC process design function or the interactive toolpath calculation command.
.. |
| |
|
| CADCEUS Usage Basic Command |
2010-11-02 |
|
14 |
1599.99 KB |
| (1) WS
Specify the workspace. See ”Common Operations/SPECIFY_WS.”
(2) OBJ state
CADCEUS prompts the operator to specify whether the objects are to be closed when closing
the workspace that is opened at the beginning of the session.
This i.. |
| |
|
| CADCEUS Usage CAM Manager Command |
2010-11-02 |
|
7 |
2252.67 KB |
| This command opens the NC section of the current object.
If the NC section is opened, the command reads in the modal information from the object. It
initializes the NC section if no modal information is found in the object.
See “MODALS” for.. |
| |
|
| CADCEUS Utility Data Exchange |
2010-11-02 |
|
13 |
1886.89 KB |
| 2.4 Viewing the list of executed data exchange and the error log
2.4.1 Viewing the list of executed data exchange
(1)Right-mouse click the start button, and select Explorer.
(2)Double-click C:, Cadceus, and Exchange in this order.
(3)O.. |
| |
|
| CADCEUS Usage Drafting Command |
2010-11-02 |
|
9 |
2519.51 KB |
| When the dimension type is set to PARARL or SUPER, the parallel or superimposed running
dimension is split into two when measuring points P2 to PN reside on the both sides of the vertical line which passes base point P1 in the direction perpend.. |
| |
|
| CADCEUS Usage Full Mold CAM Command |
2010-11-02 |
|
8 |
1750 KB |
| Description
Delete boundary curves between adjacent component surfaces on a plane.
In case that adjacent component surfaces exist on one plane, boundary curves of component surfaces are deleted.
Target is all flat planes besides side walls .. |
| |
|
| CADCEUS Usage Sketch Command |
2010-11-02 |
|
13 |
1331.18 KB |
| 3.3.2 Sketch edition/chamfers
You can chamfer between 2 line segments that are perpendicular and continuous with
the following procedure.
You specify the method of chamfering and 2 line segments that you are going to
chamfer with the global .. |
| |
|
| CADCEUS Usage Wireframe Command |
2010-11-02 |
|
9 |
2762.95 KB |
| If a line that is specified for trimming has no tangential point, CADCEUS extends the line in the direction in which the two lines intersect to find a tangential point. If the line is not specified for trimming, CADCEUS creates no arc unless the.. |
| |
|
| CADCEUS- はじめに |
2010-04-22 |
|
24 |
3.81 KB |
| 本書の目的
本書は，CADCEUSのデータ交換，モデリング，3DNCについて一連の作業の流れを理解
するためのマニュアルです。
対象読者
本書は，CADCEUSでモデリング，3DNCの作業を行う方を対象としています。
前提知識
CADCEUSの基本動作，サーフェス／.. |
| |
|
| CADCEUSでの作業の流れ |
2010-04-22 |
|
21 |
4.19 KB |
| ＣＡＤＣＥＵＳでデータを受け取り、モデリングを行い、３ＤＮＣを使用してＮＣデータを
作成するまでの基本的な作業の流れは下のとおりです。
(1) データの取り込み
不正データあり
(2) 取り込んだデータの確認
不正データなし
(3) .. |
| |
|
| CADCEUS 使用データについて |
2010-04-22 |
|
18 |
3.14 KB |
| 本書で使用するデータについて説明します。
ワークスペース：WSxx
オブジェクト ：練習
&nbs.. |
| |
|
| CADCEUS-データの取り込み |
2010-04-22 |
|
26 |
110.86 KB |
|
IGES形式のデータを例にとって，CADCEUSへの取り込みと確認方法について説明します。
4.1 IGESとは
4.2 データの取り込み
4.3 形状の検証
4.4 形状の修復
4.5 形状の再検証
4.1 IGESとは
4.1.1 IGESデータ.. |
| |
|
| CADCEUS モデリング準備 |
2010-04-22 |
|
15 |
44.09 KB |
| モデリングを行う前準備として，座標系やレイヤの設定方法を説明します。
5.1 アンダカット部（負角）の確認
5.2 座標系の設定
5.3 アンダカット部（負角）の再確認
5.4 レイヤの設定
5.1 アンダカット部（負角）の確.. |
| |
|
| CADCEUS モデリング |
2010-04-22 |
|
20 |
151.41 KB |
| 面データの作成／修復方法を説明します。
6.1 複合面と単面の特徴について
6.2 フィレットの作成（複合面）
6.3 フィレットおよびボカシ面の作成（単面）
6.4 抜けている面の作成と余分な部分の削除
6.5 課.. |
| |
|
| CADCEUS-NCデータの作成 |
2010-04-22 |
|
33 |
111.09 KB |
| 経路からNCデータを作成します。
(1) パラメータファイルの設定
パラメータファイルには，NCデータを作成するために必要な情報が設定することができます。
ユーザごとに設定内容は異なりますが，一度設定を行って登録しておけば，次回のNCデータ作成か.. |
| |
|
| CADCEUSでの作業の流れ |
2010-04-22 |
|
16 |
3.87 KB |
| 3 モデリングコマンドの復習 3－1
3.1 面トリム 3－2
3.2 面延長 3－3
3.3 結合 3－4
3.4 面／面フィレット 3－5
3.4.1 面／面フィレット（半径：一定） 3－7
3.4.2 面／面フィレット（半径：除変） 3－8
3.5 投.. |
| |
|
|
|
