SolidWorks CAD-CAM/CNC-CAE/CFD-Optical-Chemical-Petroleum-AEC/Civil-EDA/CAM-GIS/GEO-Automation

Open 4.curve_projected Select the Sketch1, start an Extrude Surface and the depth is 30mm Select the Sketch 4 and use Trim Surface . Check the Keep selection and Select the bottom part. Select a face, and draw an arc as shown: Select a ..

SolidWorks 2006 Surface Modeling Training - Day

2009-10-17

118

2243.04 KB

Open a new part. Select Right Plane and Insert Sketch. Drawing an arc. Make a new plane in the left side of Right plane, the distance is 90mm. Insert a sketch in Plane1, using Offset Entities to offset an arc and the distance is 5mm. Draw a C..

SolidWorks Surface Modeling Training - Day

2009-10-17

122.54 KB

Open Intersection Curve; hold ctrl to click these two surfaces. Tools -> Sketch Tools -> Intersection Curve Hide two surfaces. Use the intersection curve and select the Extrude Surface . Then, Select the plane

SolidWorks Surface Modeling Training - Day 1

2009-10-17

1818.91 KB

Training Content 1. Extrude surface 2. Revolve surface 3. Planner surface 4. Loft surface 5. Loft surface with single guide curve 6. Loft surface with two guide curve 7. Loft surface with multi guide curve 8. Loft surface with Point/Cent..

SolidWorks Surface Modeling Training - Day

2009-10-17

104

3399.98 KB

Training Content 1. Sweep Surface 2. Sweep Surface with guide curve 3. Sweep Surface with Point 4. Sweep Surface with Twist Control 5. Sweep with Helix Guide Curve 6. Sweep Surface C Follow path 7. Radiate Surface 8. Offset Surface, Tra..

SolidWorks Surface Modeling Training - Day 2

2009-10-17

124

2718.86 KB

Training Content 1. 3D sketch 2. 3D curve define 3. Project Curve on Surface 4. Intersection curve 5. Face Curve 6. Fillet & Variable Radius Fillet 7. Exercise 1 C Fit Spline & Delete Surface 8. Exercise 2 C Integrated Exercise..

Projected Curve on Surface

2009-10-17

400.71 KB

1. Open Project Curve on Surface 2. Front plane, Insert sketch, draws a horizontal line. Then exit sketch. 3. Hold ctrl key for multi-section. Click the line and the face. Insert->Curve->Projected, the line projected on the face to form..

Projected Curve from 2 views

2009-10-17

520.68 KB

Open 4.curve_projected Create 2 planes as shown: On the new planes, draw an arc as shown: Use Loft surface, make the 3D sketch as profiles, arc as guide curve. Use Loft Solid, loft the new surface and sketch 1. Use Cut Extrude, cut the ..

Top Down Design 1

2009-10-17

1195.59 KB

Open mouse_sketch Click sketch 2, hold ctrl and click sketch 3. Insert Curve projected. (Blue 3D curve) insert 3D sketch. Click the 3D curve, Convent Entities . (Black 3D sketch) Extrude Surface , Direction to Extrude: Top plane. End Co..

SolidWorks 2006 Surface Modeling Training - Day 2

2009-10-13

205.74 KB

New part, Top plane, Insert sketch, Draw a 100mm vertical line. Tools-> Sketch Tools-> Circular sketch Step and Repeat, step totally 5 lines. Then exit sketch. Select Top plane, offset a plane with 50mm, and draw a 70mm line with 36..

3D_sketch SolidWorks Surface Modeling Training - Day 2

2009-10-13

134.97 KB

1. 3D sketch New Part, Top Plane, Insert Sketch, draw two lines as shown, and then exit sketch. Front Plane, Insert sketch, draw one line as shown, and then exit sketch. Insert->3D sketch, draw lines to pass through the end points of lines..

Fit Spline and Delete Surface

2009-10-13

657.54 KB

New Part, Top plane, Insert Sketch, draw a 100 x 150 mm rectangle. Extrude 30 mm with 5-degree draft angle. Select top face, Insert -> Features -> Doom, apply 20mm. Select top face, Insert -> Features -> Doom, apply 20mm. Add..

Exercise Fit Spline and Delete Surface

2009-10-13

637.74 KB

New Part, Top plane, Insert Sketch, draw a 100 x 150 mm rectangle. Extrude 30 mm with 5-degree draft angle. Select top face, Insert -> Features -> Doom, apply 20mm. Add chamfers 10 x 15 mm on the top edge. Click the chamfer face, c..

Intergrated Exercise SolidWorks Surface Modeling Training - Day

2009-10-13

276.6 KB

New Part, Front plane, draw an arc, extrude surface 200 mm. Top plane, draw an ellipse, add a horizontal line and trim a half ellipse. Exit sketch. Front plane, Insert sketch, offset the arc 15mm. Exit sketch. Loft surface as shown. Start/End..

Face Curve in SolidWorks Surface Modeling Training - Day

2009-10-13

207.23 KB

Open Face Curve, click the surface. Tools -> Sketch Tools -> Face Curve You can loft a new surface with less profiles and guide curves to make a smoother surface, with the same boundary curve.

Fillet and Variable Radius

2009-10-13

480.37 KB

Open Hold Line Fillet. On Right plane, Insert sketch, offset 10mm the hole outer edges. Exit sketch. Insert -> Curve -> Split Line. Split the surface by the sketch. Face Fillet, use the split line as Holdline. The Fillet is created &a..

Integrated Exercise SolidWorks Surface Modeling Training - Day

2009-10-13

1281.4 KB

New Part, Front Plane, Insert sketch, draw a 100 x 80 mm rectangle. Extrude 80mm. On the right side face, draw an arc, Extrude cut , through all. On the bottom face, Insert sketch, draw a line. Then exit sketch. On the top face, Insert sketc..

Integrated Exercise in SolidWorks Surface Modeling Training - Day

2009-10-13

624.48 KB

New part, Front plane, insert, draw a 30 mm arc. Then exit sketch. Front plane, insert sketch, draw a horizontal centerline, and an ellipse as shown, then trim the ellipse so that the top half remains. Then exit sketch. Top plane, insert sket..

Integrated Surface in SolidWorks Surface Modeling Training - Day

2009-10-13

1878.26 KB

Click Swept Surface . Select Sketch6 for Profile and select Sketch4 for Path. Select Sketch 5 for Guide Curves Check Merge smooth faces. Clear Merge tangent faces. . Click Swept Surface . Select Sketch 9 for Profile and Select Sketch 7 for ..

SolidWorks_Polygon Video Tutorial

2009-04-30

104

3.61 KB

SolidWorks_Polygon Video Tutorial

SolidWorks_Positioning Sketch Video Tutorial

2009-04-30

3.38 KB

SolidWorks_Positioning Sketch Video Tutorial

SolidWorks_Rapid Sketch Video Tutorial

2009-04-30

3.03 KB