In this exercise you will optimize the tension in a strap and save results of the
optimization iterations. You will then include this optimization feature in a
PowerCopy for a later reuse in any gear assembly objectives and of the skills
needed to complete it

Givens:
The aim is to adapt a strap on a pre-existing
assembly containing 3 wheels and a wheel
adjuster.
The strap has to be chosen from predefined
lengths.
The position of the wheel adjuster will allow to
get a specific tension in the strap.
Goal:
Optimize the tension in the strap to a target
value by modifying the position of the wheel
adjuster.

Define the optimization in Problem tab
Select the optimized parameter
Select TENSION as the Optimized Parameter.
Choose the optimization type
Choose Target value type of optimization with 1000N  as target
value for the optimized  parameter
Edit the list of free parameters
Select x_adjuster as Free parameter.
Specify the range from 1mm to 200mm with the step of 0.5mm
for x_adjuster.
Select y_adjuster as Free parameter.
Specify the range from 140mm to 280mm with the step of
0.5mm for y_adjuster.